From here, your Apple Watch and iPhone will start to disconnect and this may take up to 10 minutes or so depending on how much data you have on your wristwear. We find it doesn’t always take that long, so keep an eye on the watch and keep it near your phone during the whole process.
Likewise, what will erasing your Apple Watch do? Erasing all content and settings erases all media, data, and settings from your Apple Watch, but it does not remove Activation Lock. To remove Activation Lock, unpair the watch first. Before your watch is erased, a backup of its contents is created on your iPhone.
In regards to, how long does it take for an iPhone to erase? The process of erasing all content and settings on an iPhone should take less than 10 minutes. If you’re using an older model iPhone though, it could take a bit longer, depending on the phone’s generation of data removal. Despite this, if it’s taking up to an hour, you need to fix it.
Also know, can you completely erase an Apple Watch? Open the Settings app on your Apple Watch. Go to General > Reset, tap Erase All Content and Settings, then enter your passcode. If you have an Apple Watch with a cellular plan, you’re offered two options—Erase All and Erase All & Keep Plan. To completely erase your Apple Watch, choose Erase All.
Additionally, how long does it take to restore Apple Watch from backup? It could take a minute or two to complete. Now, you’ll see the following screen in the Apple Watch app. Tap on “Start Pairing” to pair the Apple Watch you just unpaired. Next, instead of setting up as a new Apple Watch, select the previous backup that you want to use and tap on “Continue”.
Why is my Apple Watch taking forever to restart?
Most of the time when your Apple Watch is stuck on the Apple logo, its software crashed while turning on and your Apple Watch is frozen. We can reboot a frozen Apple Watch by performing a hard reset, which forces your Apple Watch to abruptly turn off and back on.
Can you factory reset a locked Apple Watch?
Press and hold the side button until you see Power Off. Press and hold the Digital Crown until you see Erase all content and settings. Tap Reset, then tap Reset again to confirm. Wait for the process to finish, then set up your Apple Watch again.
How do you hard reset an Apple Watch?
- Hold down the side button and Digital Crown at the same time. The Digital Crown is the rotating button located on the side of the device.
- Keep holding these two buttons down until you see the Apple logo appear on the screen.
How do I unpair my Apple Watch from my old iPhone?
On your iPhone, in the Watch app, go to: My Watch (tab) > tap on the name of the watch (at the top) > tap on the “i” icon next to the watch > if the button is shown, tap on Unpair Apple Watch and follow the further instructions.
Why is my iPhone erase taking so long?
If your phone continues to attempt “resetting” for longer than an hour, there may have been an error in the reset process. If this occurs, you’ll need to load your phone in Recovery Mode and reset it that way. If resetting from Recovery Mode still doesn’t work, there may be an error with your iPhone’s hardware.
Why is my iPhone erase pending?
If your device is offline, you see Erase Pending. The remote erase begins the next time it connects to a Wi-Fi or cellular network.
Does erase iPhone erase everything?
When you delete data, it’s no longer accessible through the iPhone interface, but it isn’t erased from iPhone storage. To remove all of your content and settings from storage, erase iPhone. For example, erase iPhone before you sell it or give it away.
How do I reset my Apple Watch without an Apple ID and previous owner?
- Launch the Settings app on your Apple Watch and tap the General option.
- Select the Reset option and tap on Erase All Content and Settings.
- Your Apple Watch will ask you to input your passcode.
- Tap the Erase All option and your Apple Watch will begin to reset.
How do I transfer my Apple Watch to another user?
- Erase your Apple Watch.
- Set up your new iPhone and sign in to iCloud.
- Open the Apple Watch app on your new iPhone, then pair your watch with your new iPhone.
- Try to restore from a backup.
- Follow the onscreen steps to finish setting up.
- Start using your Apple Watch with your new iPhone.
Why won’t my Apple Watch do a hard reset?
Just because your Apple Watch will not do a force restart, that doesn’t necessarily mean that a hard reset won’t work for it. It is sometimes that hard reset that galvanizes it back into action. To do one, you’ll have to press and hold the Side button at the same time as the Digital Crown.
Should I set up Apple Watch as new or restore from backup?
Set up as new or restore from a backup If this is your first Apple Watch, tap Set Up as New Apple Watch. Otherwise, tap Restore from Backup. If asked, update your Apple Watch to the latest version of watchOS. Your Apple Watch might require a software update before you can set it up.
What does red exclamation mark mean on Apple Watch?
Your Apple Watch might show an animation asking you to bring it close to an iPhone if your watch experiences a problem that requires it to be updated or restored. You might also see a red exclamation point on your watch.
How do I know if my Apple Watch is backed up?
You can verify that it indeed backed up by going to Settings > General > iPhone Storage > Watch. Under Documents & Data, you should see the name of your Apple Watch, along with the date of your latest back up.
Why is my Apple Watch stuck on the Apple logo after reset?
Restart your Apple Watch After one minute, press the same side button to switch on your Apple Watch. It may take your Apple Watch up to 2 minutes to power on. This quick fix should get your Apple Watch out of the stuck Apple logo.
Why is my Apple Watch taking forever to pair?
First, make sure both devices have Wi-Fi and Bluetooth enabled and are in range of each other. Then, try restarting your Apple Watch and iPhone, as well as resetting your iPhone’s network settings.
What does it mean when your Apple Watch is stuck on the Apple logo?
Simply press and hold both the side buttons and the Digital Crown simultaneously for a few seconds. If your smartwatch restarts normally, you have got rid of the issue. If you are trying to update the watch, make sure it has enough storage (Watch app on iPhone > General > Storage).
How do I remove an Apple Watch from previous owner’s account?
- On a computer, go to Find My iPhone on iCloud.com and sign in with your Apple ID.
- Select All Devices, then click your Apple Watch.
- Click Erase Apple Watch. Select Next until the device is erased.
- Click the X button next to your Apple Watch.
How do you reset a locked Apple Watch without paired phone?
- Place your Apple Watch on its charger.
- Hold the side button until the Power Off screen appears.
- Press the Power Off slider firmly (do not slide it)
- Select Erase All Content and Settings.
- Your Apple Watch will reset to factory settings.
How do I factory reset my Apple Watch with buttons?
Press and hold the side button until you see the Power Off screen. Hard press the Power Off slider and then let go. Tap Erase all content and settings. You’ll be asked to set up your Apple Watch again when the process ends.
How do I bypass activation lock on Apple Watch?
As the original owner of the device, and having access to the iPhone that the Apple Watch was paired with, the original owner can simply unpair the Watch from their iPhone. This will remove the activation lock from an iOS device. They will need access to the Apple Watch app on their iPhones.
How do I reset my Apple Watch to a new phone?
- Erase your Apple Watch.
- Set up your new iPhone and sign in to iCloud.
- Open the Apple Watch app on your new iPhone, then pair your watch with your new iPhone.
- Try to restore from a backup.
- Follow the onscreen steps to finish setting up.
- Start using your Apple Watch with your new iPhone.
Is erase all content and settings the same as factory reset?
Reset all Settings removes things like your Wifi password and settings you’ve set on your iPad for Apps, mail, etc. Erase All Content and Settings restores a device to it’s out of the box state when it was first turned on. You should use Erase All Content and Settings to get it ready for the next owner.
What to do if iPhone freezes while erasing?
Question: Q: erase iPhone is stuck Answer: A: Make a quick press of Volume up, followed by a quick press of Volume down and then hold down the power button until it restarts.
How do I know if my iPhone has been erased?
Login to your iCloud account, and go to Find my iPhone. click on the All Devices dropdown, It should show you the status of your phone. If it has been erased, it will not show in the list( Again, assuming it was the find my iPhone setting was enabled by you and wasn’t disabled by the thief).
What do thieves do with stolen iPhones?
That’s where the stolen iPhones go. Thieves who realize that they can’t use the stolen iPhone will break the device into several parts and sell them to shady repair shops or stores for money. These types of stores need several parts of the iPhone, like the screen to fix someone else broken iPhone at a cheap rate.
