FIRST – Press and hold the multi-function button on both earbuds until you hear a prompt to “Power On”. You will then hear the prompt “Pairing”. You will hear 2 chimes* indicating that both earbuds are ready to pair. SECOND – Select ‘Tzumi Sound Mates’ from your device’s Bluetooth display list.
Subsequently, how do you turn on both sound mates? Press and hold the multi-function button on both earbuds for a few seconds until you hear prompt “ Power on”, and see blue lights flashing.
Also, how do you turn on Tzumi earbuds? TURNING ON YOUR EARBUDS METHOD 1: Remove your earbuds from the charging case. Both earbuds’ LEDs will flash blue. METHOD 2: If the earbuds are not inside the charging case or are turned off, press and hold the Multifunction buttons for 2 seconds until the blue LEDs flicker and your hear “Power ON”.
Considering this, how do you put Tzumi headphones in pairing mode? How Do You Put The Tzumi Headphones In Pairing Mode? Tap the Connections option in settings. Press Bluetooth in the Connections window. Tap on the Tzumi Bluetooth device when it appears under ‘Available devices’, and then your Android device will be connected to your headphones once it has been connected.
Furthermore, how do you pair Tzumi sound mates without buttons? No physical button? To connect you must go to the Bluetooth settings on your phone and start it scanning. Quickly take one earpiece from the case, then the other. If your phone is scanning, there will be a very short time when they will show up for pairing.FIRST – Remove both earbuds from the charging case. They will begin auto-pairing to each other, You will hear 2 beeps to confirm a successful pairing. THIRD – You will hear “Device Connected.” Your Soundmates are now ready to use! THIRD – You will hear “Device Connected.” Your Soundmates are now ready to use!
How do you use both Tzumi sound mates?
- Press and hold BOTH earbuds until you hear the pairing Prompt in BOTH ears.
- Select ONLY ONE Tzumi Soundmates in the Bluetooth options on the device. IF YOU SEE TWO OPTIONS YOU MAY HAVE TO REPEAT THE PROCESS OVER AGAIN.
- Once device confirms Device Connected You should hear in both ears. Hope this helps.
How do you know when Tzumi sound mates are fully charged?
The earbuds are fully charged when the red lights on the earbuds turn off; likewise, the case is fully charged when the red light stops blinking ok the case, and turns to a solid red.
How do I turn up my Tzumi Probuds?
- Increase volume: Press the multi-function button 2 times consecutively, holding the button down at the second push ( ).
- Decrease volume: Press the multi-function button 3 times consecutively, holding the button down at the third push ( ).
Why wont my Tzumi Probuds connect?
Why Are My Probuds Not Connecting? If the earbuds are not fully charged, they won’t turn on. Make sure the earbuds are fully charged before using them for the first time. If the Bluetooth connection between your earbuds and your device is not established, please reconnect and adjust the volume accordingly.
Do Tzumi earbuds work with Iphone?
How Do I Pair My Tzumi Earbuds To My Iphone? Tap the Connections option in settings. Press Bluetooth in the Connections window. Tap on the Tzumi Bluetooth device when it appears under ‘Available devices’, and then your Android device will be connected to your headphones once it has been connected.
Why is my Airpod flashing red and blue?
They are in pairing or discovery mode. This means your headphones are looking for another Bluetooth device to connect with. Sometimes, headphones in pairing mode are trying but failing to connect with another device. They’re running into an error during pairing, so they blink red and blue to let you know.
What is the multifunction button on Tzumi sound mates?
When blue/red lights flash quickly, press multi-function button twice on the earbud you want to set as the MASTER Earbud. Option 1: Long press the Multi-function button for about 4 seconds, hear ”Power off”, the both earbuds will turn off. Option 2: Put earbuds into charging case and it will be charged automatically.
How long do Tzumi sound mates last?
Tzumi Sound Mates : The batteries only last about 2 hours.
How do I turn up the volume on my Tzumi Soundmates?
Swipe down from the top of your phone and choose Media output. It will show connected devices with a volume button to decrease or increase volume on that device. Just move the volume bar on Soundmates to the left to decrease the volume.
How do I pair Soundmates pro ANC?
- Remove earbuds from the case.
- Open the Bluetooth pairing list on your device and click on “Soundmates Pro ANC”.
- Your device should now be paired and ready for use.
Are Tzumi sound mates waterproof?
Bluetooth 5.1 Headphones, Wireless Earbuds with LED Digital Display, IPX7 Waterproof, CVC8. 0 Noise Cancelling, 40H Playtime with Fast Charging Case, Suitable for Sports and Work.
Why is only one of my Soundmates working?
In order to pair the two devices together, turn them both off. Unpair them from the phone. Turn on each device at the same time by holding down the buttons at the same time. Each will say power on at the same time.
Do sound mates charge in the case?
Place soundmates in case, they will charge automatically with the magnetic base. The LED will turn solid red while charging. Once fully charged LED will turn off.
How do you use Tzumi Probuds v2?
BLUETOOTH PAIRING INSTRUCTIONS Enable your device’s Bluetooth function from Its Settings menu. Select Tzumi Probuds’ from the Bluetooth device list to pair the earbuds to your device. Once paired, you will hear “Device connected”. Your Probuds are now ready to use!
How do I turn on my Probuds v2?
Quickly press both earbuds on multi-function 3 times to enter earbuds pairing mode . Wait for two earbuds connecting for a few seconds . The blue light will flash once every 7 seconds if connected . Both earbuds are now ready for use.
How do I pair my Iphone with Probuds?
- Press and hold the multi-function button for 4 seconds until blue and white lights flash quickly.
- Activate the Bluetooth function on your device to search for Bluetooth devices.
- When successful connection is made you will hear prompt “Connected.” Right earbud is now ready for use.
How do I reset my fake AirPods?
What does orange light on AirPod case mean?
To get a confirmation that your AirPods are charging, the status LED on the case will light up in orange color as soon as you’ll connect the case with a power source. A solid orange light on the status LED means the AirPods are charging.
Why are my AirPods flashing orange?
For any of the existing AirPods variants, the orange light signifies that you need to charge them already. So, if your AirPods still flash orange, maybe a quick plug to a power source can solve it. You can use the AirPods Gen 2 for around 5-6 hours on a single charge and up to 24 hours with the charging case.
How long does it take to charge a Tzumi?
The battery must be fully charged prior to use. It takes approximately 3 hours to fully charge your speaker (from depleted unit). Via Computer: Using the provided Micro USB cable, connect your speaker (Micro USB port) to the computer/laptop (USB port).
How do you check the charge of your AirPods?
On your iPhone, iPad, or iPod touch Open your case lid with your AirPods inside and hold your case close to your iPhone, iPad, or iPod touch. Wait a few seconds to see the charge status of your AirPods. You can also check the charge status of your AirPods with the Batteries widget on your iPhone, iPad, or iPod touch.
Why are my Soundmates so low?
Goto Settings/Music and disable the volume limit. Also try turning off the ‘Sound Check’ option in this same settings screen. Let us know if these help. you could possibly have them in backwards (left earbud in right ear and vice versa) speaking from experience.
Do the Tzumi SoundMates have a mic?
These upgraded earbuds auto-pair as soon as you remove them from the case and provide seamless Bluetooth calling capabilities with a built-in microphone, touch sensor buttons and high-resolution sound. SoundMates are the perfect earbuds for any lifestyle and will provide up to 2.5 hours of crisp, clear stereo sound.
How do I connect my AirPods?
Put both AirPods in the charging case and open the lid. Press and hold the setup button on the back of the case until the status light flashes white. Select your AirPods in the Devices list, then click Connect.
How do you make both Probuds work?
– put both earbuds in your ear – press both buttons at the same time until you hear power on for both. Then press and hold one of the earbuds for a couple of seconds – you will hear left or right channel message. Then pair to your blue tooth device.
